KT4200 4-Channel Amplifier
Description
- Independent Bass and Treble control for each channel.
- Three power configerations; four channel 4 X 200W, 3 channel 2 X 200W + 1 X 600W or 2 channel 2 X 600W.
- Individual 4 channel inputs and switchable global bus input.
Independent volume control for 4 channels, recessed Treble and Bass control, independent signal indication, independent clip indication. - Bridge mode switch for channel 1& 2 and channel 3& 4, bridge and common protection LED indicators.
- Balance BUS IN available.
Specifications
| Minimum Guaranteed Power | |
1 kHz with 0.5% THD |
|
4-Channel, 8 ohms |
4x200W |
4-Channel, 4 ohms |
4x300W |
Bridge-stereo, 8 ohms |
2x600W |
Performance |
|
Sensitivity (volts RMS) for full rated power at 8 ohms |
0.775V |
Frequency Response (at 1 watt,20Hz - 25kHz) |
+0dB, -0.5dB |
Phase Response (at 1 watt, 20Hz to 20 kHz) |
+10, -20 |
Signal to Noise Ratio below rated power A-weighted |
>100dB |
Total Harmonic Distortion (THD) at 1 full bandwidth |
<0.1% |
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, |
<0.05% |
Damping Factor (8 ohm): 20 Hz to 400 Hz |
>200 |
Input Impedance (nominally balanced, nominally unbalanced) |
20 kilohms, 10 kilohms |
Common Mode Rejection |
≥-65dB |
| Performance | |
| Load Impedance (Note: Safe with all types of loads) | |
| 4-Channel | 4-8 ohms |
| AC Line Voltage and Frequency Configurations Available ( 10%) | ~220-240 V and 50/60 Hz |
| AC Line Current (both amplifiers draw no more than 90 watts at idle) | 8A |
| Construction | |
| Ventilation | Flow-through ventilation from front to back |
| Cooling | Proportional speed fan |
| Dimensions(H x W x D) | 89mm x 483mm x 360mm |
| Net Weight/Shipping Weight | 16kg/19kg |
